Fire Fighting Solutions

At the core of the range of products is the operational PPE which offers a range of head-to-toe garments to meet all the protective needs of 21st century fire & rescue services. A more specialist approach to firefighting has created a need for specialised garments to better meet the demands of structural and wildland firefighting and technical rescue situations.

9687L - Harvik

Specification Type of construction - Vulcanized Rubber Upper and Sole Upper construction - Flame retardant upper with heat insulation - Reinforced rubber - Waterproof - High visibility with black and yellow contrast Sole / Heel - Flame retardant rubber outsole - Fuel oil resistant sole suitable for inimical environment - Slip resistant vulcanized rubber sole - Excellent abrasion resistant for extra durability - Withstand 18kV of life current at dry condition - Heel energy absorption design to minimize heel impact - Catered to enter high temperature - Cold insulation sole construction Steel Midsole - Non-corrosive stainless steel - Withstands pin & sharp objects Steel Toe - Non-corrosive...

Mullard - LTX Series

Features M-PACT Shellâ„¢ with SmartRidge design High-heat thermoplastic outer shell Hard-coated high heat thermoplastic material facesheild-meets ANSI Z87.1-2003 Standard for Eye and Face Protection Comfortable Sure-Lock ratchet headband Balanced 4-point nylon crown straps and crown pad Nomex chinstrap with quick-release buckle and postman’s slide fastener Rip-stop Nomex ear/neck protector Leather ratchet cover Removable fire-resistant, absorbent cotton brow pad Quick-Attach faceshield or goggle system 12 comfort settings Scotchliteâ„¢ reflective markings Certified to NFPA 1971, 2007 standard 

MSA- Gallet- F1 XF

Unique adjustable ocular visor – fitting over prescription glasses while providing gap-free enclosure • Comfortable, high-performance face protection with excellent coverage, clear or gold coating • Extended thermal & mechanical protection even in extremely hot conditions, fully integrated lighting module with unique distribution of light and weight, supporting work and safe navigation in the dark • Optimized care and maintenance procedures, leading to reduced cost of ownership and safer use, unique customization capabilities with interchangeable front plate and personnalized molded or printed badge  

Bullard FX Series

Features Chemical-resistant fiberglass outer shell High-heat thermoplastic inner shell Comfortable Sure-Lock ratchet headband Balanced 6-point nylon crown straps and crown pad Nomex chinstrap with quick-release buckle and postman’s slide fastener Rip-stop Nomex ear/neck protector Leather ratchet cover Removable fire-resistant, absorbent cotton brow pad Hard-coated optically-correct faceshield Scotchlite™ reflective striping 12 point comfort system Model FXA1 meets U.S. Navy requirements for shipboard firefighting (GSA and commercial availability) Model FXE tested and certified to EN 443 by INSPEC, CE certified (for export only) Certified to NFPA 1971, 2007 standard

Fireman SA Boots

Features FIREMAN SA Boot (toe cap and mid sole are made in composite) Type 3 (maxi level) Excellent resistance to heat flow, heat contact, fire Resistance to chemicals: fuels, oils, weak and diluted acids,solvents Resistance to abrasion and cuts Used with chemical protective suits (satisfy permeation test according to EN 943-2). Standard: EN 15090-2012 F3A 

AWG Fittings

Features: Couplings for Fire Fighting Services, Mobile Water Supply Equipment for Fire Brigades and Mobile Water Supply (Pumps, Pressure Valves, Dividers, ….) Branch pipes, Monitors and Nozzles (Monitors, Nozzles, Branchpipes,…) Accessories for Fire Pumps(Valves,…) Fittings for Preventive Fire Protection (Landing Valves, Euro Nozzles, …)

Flash Light & Helmet Mount

Features: Powered by 3 AA alkaline batteries, included Flashlight body is virtually indestructible, chemical and shock resistant, anti-static and lightweight Unbreakable polycarbonate lens features a scratch resistant coating and is O-ring sealed Features a 6.5-hour run time IP67 Rated for dust-tight and waterproof to 1-meter for 30-minutes Standard: EN 469:2005

Rescue II

Description Palm and backhand are made out of a special fireresistant cow nappa leather, making the glove longlasting and giving a high cut resistance and abrasion. The splitleather gauntlet is adjustable and delivers together with the elastic wristpart a perfect fitting. For additional protection this glove features a knuckle protector and a breathable, waterproof blood borne pathagon proof insert. Sizes: 7 - 13

Hankok

Features Water resistant Bovine fire retardant leather Waterproof membrane lining Fire retardant stitching & front zipper Leather Insole Steel toecap, Steel midsole Fire retardant Rubber Outsole Zermatt Size: 36-48 Standard: EN 15090:2012, EN 20345:2011

Fire Shark Long

Features: Eurotex-membrane (windproof, waterproof and breathable) Padding in the finger area Cuff width adjustable 3M reflective stripes on the cuff eyelets Siliconized double-face knit patch Palmhand made of Nappa-leather Tophand and cuff made of Carbon X

Fireman Suit

Features: Insulation Layers Hight Visibility reflective stripes Conforming EN 469 quality after 5 washes also 270 gsm Pyrovatex Cotton FR fabric Water Proof, Oil proof ISO 9001 AND ISO 14001 Standards Color: Blue

Promax Suit

Features 3Layers Fireman Suit 1. Nomex Delta IIIA 2. Thermal Barrier 3. Moisture Barrier Meets EN 469/95 & EN340 3M Flame retardant reflective tape

Top Rescue

Features: A knuckle protector and a breathable, waterproof and blood borne pathagon proof insert. Double face knitted, silicon bonded Kevlar Top- and Palm hand guarantees a perfect grip and is flexible enough to offer a very good dexterity. 60% Meta-Aramid, 40% Kevlar Gauntlet: 50% Nomex 50% Viscose

Fire Vulcan Red

Features: Powered by 3 AA alkaline batteries, included Flashlight body is virtually indestructible, chemical and shock resistant, anti-static and lightweight Unbreakable polycarbonate lens features a scratch resistant coating and is O-ring sealed Features a 6.5-hour run time IP67 Rated for dust-tight and waterproof to 1-meter for 30-minutes Standard: EN 469:2005

System Protecsafe

Multi-layered jacket and trouser made from meta aramide outer shell fabric, moisture barrier fabric and thermal liner. • Dark Blue Color • Jacket & Trouser • Outer shell is Nomex IIIA • Thermal line- FR felt quilted to FR modacryloic face cloth • 3M tested to EN 471 for Reflective tape • Moisture barrier- Membrane on FR non woven • Accessories stiched at the garment are flame/heat resistance Standard: EN 469:2005

System Firedefenc

Multi-layered jacket and trouser made from PBI outer shell fabric, moisture barrier fabric and thermal liner. • Yellow with reflective tape • Jacket & Trouser • Outer shell is PBI • Thermal + Moisture Barrier- EOLINER • 3M tested to EN 471 for Reflective tape • Face cloth is made of Aramide • Accessories stiched at the garment are flame/heat resistance

MSA- Gallet- F1 SF

Specifications: 
-Shell: High temperature polyamide -Shock absorption padding: polyurethane with wool / aramide layer. -Cradle and chinstrap: aramide straps, leather, polyamide, polycarbonate. -Interfaces (SCBA mask and accessories): Polycarbonate / Polyamide 3 positions adjustment for SCBA mask. -Neck curtains: fire resistant wool, nomex, aluminised fabric (tested according to EN469).